Our window film is suitable for all smooth, flat glass surfaces, including but not limited to:

• Home windows (living rooms, bedrooms, kitchens)
• Glass doors (front doors, interior partition doors)
• Bathroom and shower glass
• Balconies, home offices, or glass room dividers

As long as the glass surface is clean, smooth, and non-textured, the film can be applied properly.

⚠️ Not recommended for frosted glass, textured glass, or plastic surfaces.

Yes. This window film comes in a full roll and can be easily trimmed to fit irregular or non-standard window shapes, including arches, triangles, circles, and small panes.

Yes.

Our window film uses static cling technology and contains no adhesive:

• It can be lifted, adjusted, and repositioned multiple times during installation
• Leaves no residue and will not damage the glass
• If misaligned or air bubbles appear, simply spray water again and reposition

When no longer needed, the film can be removed easily without affecting the original glass surface.

In most cases, no.

The window film provides effective privacy while still allowing natural light to pass through:

• Blocks direct outside views into your space
• Reduces visibility without darkening the room
• Ideal for ground-floor windows, street-facing windows, or homes close to neighbors

📌 Please note:

At night, when indoor lights are on and it is dark outside, faint silhouettes may be visible. This is normal for all light-transmitting privacy films.

No.

While enhancing privacy, the film still allows ample natural light to enter:

• Does not significantly reduce the sunlight plants need
• Softens harsh light and reduces direct glare
• Helps protect plant leaves from excessive UV exposure

It is safe and suitable for most indoor plants, such as pothos, succulents, and monstera.

We offer multiple standard sizes to fit common window dimensions.

Before purchasing, we recommend:

• Measuring the width and height of your glass
• Allowing an extra 1–2 cm for trimming

The window film is delivered as a full roll, allowing you to cut it freely based on your window’s exact size or shape.

It can be easily trimmed using scissors or a utility knife, making it suitable for non-standard or irregular glass surfaces.

(1) For pets (such as dogs)

The film helps blur frequent outside movement, which can reduce:

• Sudden visual stimuli from passing pedestrians
• Anxiety or excessive barking caused by outdoor activity

A great option for pet-friendly homes.

(2) Car Sunroof

The window film can be applied to car sunroofs to enhance interior decoration and soften incoming light.

However, please note:

• It is not suitable for high-temperature environments
• Not recommended for strongly curved glass surfaces
• Not suitable for areas exposed to long-term direct sunlight

📌 Please note:

If your vehicle is frequently exposed to intense heat or sunlight, we recommend using a window film specifically designed for automotive use.

(3) Aquarium

It can be applied to the outside glass of an aquarium as a decorative or background element:

• Reduces visual clutter and unwanted reflections
• Enhances clarity and depth of the aquarium display

⚠️ Do not apply the film to the inside of the aquarium or to areas that are continuously exposed to water.

If the edges of the window film lift or curl, it is usually caused by installation conditions or surface issues. Follow the answer below to identify the cause and correct it.

Low temperature

Cold temperatures can make the film stiff and less flexible, increasing the chance of edge curling. Before installation, place the film in warm water for a short time to soften it, then apply it to the glass.

Film cut too wide

If the film overlaps the silicone sealant around the window, the uneven surface may cause the edges to lift. Re-cut the film so it does not cover the sealant. Leaving a small gap between the film and the window frame helps ensure a smooth finish.

Glass not fully cleaned

Dust, oil, or residue on the glass can prevent proper adhesion, especially along the edges. Clean the glass thoroughly with water and a lint-free cloth before applying the film.

Insufficient water during installation

Using too little water may cause the film to stick too quickly, making it difficult to smooth the edges. Spray enough water on both the glass and the film to allow proper positioning and adhesion.

Air or water not fully removed

Trapped air or water near the edges can push the film outward over time. Use a squeegee or soft card to press firmly from the center toward the edges to remove bubbles completely.

Uneven or textured glass edges

Some windows have beveled or uneven edges that reduce adhesion. In these cases, trimming the film slightly smaller than the glass area can help prevent edge lifting.

Follow these steps to install your window film easily and achieve the best results:

1. Measure your window first
2. Clean the glass thoroughly
3. Spray a soapy water solution on the glass
4. Peel the film from its backing
5. Apply the film onto the wet glass
6. Use a squeegee to smooth it out
7. Trim the edges for a neat finish
8. Let the film set

For a step-by-step visual guide, please visit: https://www.youtube.com/watch?v=8Kj3BYlFA5c